Model LD 125 '57
-
Ld 125 '57
The Lambretta model LD 125 '57.
Technical Specification
| Model | LD 125 '57 |
| Amount Produced | 44665 |
| Production Dates | January 1956 – July 1958 |
| Frame Prefix | 125LD |
| Engine Prefix | 125LD |
| Frame Starting Number | 522001 (not definitive) |
| Engine Starting Number | 522001 (not definitive) |
| Homologation | Unknown |
| Engine | 123cc, two stroke, 52x58mm |
| Power and Rate | 5hp at 4600rpm |
| Compression Ratio | 1:6.3 |
| Head and Cylinder | Aluminium and cast iron |
| Engine Cooling | Forced Air |
| Ignition | Filso, Nassetti or Marelli. Filso or Marelli magneto |
| Spark Advance | 24' – 26' 4 – 4.6 mm before TDC |
| Point Setting | .40-.50 mm |
| Carburetor | Dell'orto MA 18 B4 |
| Choke | 18mm |
| Slide | 75 |
| Needle | D1 |
| Atomiser | 255b |
| Main Jet | 70 |
| Pilot Jet | 40 |
| Starter | 55 |
| Float | 6.5 grams |
| Starter | Pedal with helical or optional electric starter |
| Crankcase oil | Agip Energol SAE 30 550 grams |
| Transmission Oil | Agip energol 140 120 – 130 grams |
| Oil / Gas Mix | 6% |
| Clutch | Multiple discs in oil bath |
| Gears | 3 speed with hand shifter |
| 1st | |
| 2nd | |
| 3rd | |
| Primary Transmission | Gear |
| Secondary Transmission | Shaft |
| Frame | Steel tubing of strong 1281mm sections |
| Front Suspension | Oscilating conecting rods |
| Rear Suspension | torsion bar attached to motor |
| Wheels | Dismountable wheels |
| Tires | 4.00 x 8 |
| Tire Presure | Front .8 ATM, rear 1.75 ATM |
| Brakes | Drum |
| Dry Weight | 86kg |
| Km Per Gallon | 1lt per 100km |
| Fuel Capacity | 6.4lt plus .7lt reserve |
| Max Speed | 70-75kmh |
| Initial Price | 135,000 Italian Lira |
| Electrical System | 6 volt |
| Sparkplug | Bosch 225 short thread |
| wheel Base | |
| Maximum Length | |
| Ground Clearance | |
| Maximum Seat Hight | |
| Minimum Turning Radius | |
| Colour | Earth Grey 8041 |
| Engine Colour | Fiat 690 |
Copyright © 2018-2025 - All Rights Reserved - British lambretta Archive
Design by John Walklate